杭州新茶论坛 – 夜上海论坛-爱上海419论坛-上海后花园论坛-上海龙凤1314

The fastest four-door car in New North! Millet SU7 Ultra prototype New North Circle is quickly released.

Today, Xiaomi announced the New North lap speed of the Ultra prototype-6 minutes 46 seconds 874, making it the fastest four-door car in New North at present.

The climate of New North Circuit was rainy, and this test also encountered many difficulties. Weibo of Lei Jun shared some nodes, and all the scheduled two-day test was rainy. Later, after many parties coordinated, it was officially tested on October 28th, and obtained the official certification lap speed.

Some people may not know what level the lap speed of Xiaomi SU7 Ultra is in the ring of truth. Let’s find a lap speed ranking and find out what kind of monsters can run in 6 minutes and 50 seconds. It is not controversial to say that it is the fastest four-door car.

GO Chejun Comments: There is a huge difference between Xiaomi SU7 Ultra and the ordinary version of Xiaomi SU7, and the price should not be acceptable to ordinary people. For reference, the guide price of Krypton 001 FR is 769,000 yuan. Guess how much Xiaomi SU7 Ultra will sell?

Steady and good! China’s GDP increased by 12.7% in the first half of the year.

　　People’s Daily Online, Beijing, July 15 (Zhao Zhuqing) Today, the National Bureau of Statistics announced that the national economy in the first half of 2021 showed that in the first half of the year, China’s economy continued to recover steadily, production demand continued to pick up, employment prices were generally stable, new kinetic energy grew rapidly, quality and efficiency improved steadily, market players expected to improve, major macro indicators were in a reasonable range, and economic development showed a steady and stable trend.

　　According to preliminary accounting, the GDP in the first half of the year was 53,216.7 billion yuan, up 12.7% year-on-year at comparable prices, down 5.6 percentage points from the first quarter. The average growth rate in two years was 5.3%, and the average growth rate in two years was 0.3 percentage points faster than that in the first quarter.Quarterly, the first quarter increased by 18.3% year-on-year, with an average growth of 5.0% in two years; It increased by 7.9% in the second quarter and 5.5% on average in two years. In terms of industries, the added value of the primary industry in the first half of the year was 2,840.2 billion yuan, up 7.8% year-on-year, with an average growth of 4.3% in two years; The added value of the secondary industry was 20,715.4 billion yuan, a year-on-year increase of 14.8%, with an average increase of 6.1% in two years; The added value of the tertiary industry was 29,661.1 billion yuan, up 11.8% year-on-year, with an average growth of 4.9% in two years. From the ring comparison, the GDP in the second quarter increased by 1.3%.

　　Summer grain was harvested again, and animal husbandry production grew steadily.

　　In the first half of the year, the added value of agriculture (planting) increased by 3.6% year-on-year, and the growth rate was 0.3 percentage points faster than that in the first quarter; Average growth of 3.7% in two years. Among them, the growth in the second quarter was 3.7%, 0.4 percentage points faster than that in the first quarter. The total output of summer grain in China was 145.82 million tons (291.6 billion Jin), an increase of 2.967 million tons (5.93 billion Jin) or 2.1% over the previous year. The agricultural planting structure has been continuously optimized, and the planting area of cash crops such as rapeseed has increased. In the first half of the year, the output of pork, cattle, sheep and poultry was 42.91 million tons, up by 23.0% over the same period of last year, of which the output of pork increased by 35.9%. Milk production increased by 7.6% year-on-year, while poultry and eggs production decreased by 4.1%. At the end of the second quarter, the number of live pigs was 439.11 million, a year-on-year increase of 29.2%; Among them, there are 45.64 million sows that can breed, an increase of 25.7%.

　　Industrial production has grown steadily, and high-tech manufacturing has grown rapidly.

　　In the first half of the year, the added value of industrial enterprises above designated size increased by 15.9% year-on-year, with an average growth rate of 7.0% in two years, 0.2 percentage points faster than that in the first quarter; Among them, the second quarter increased by 8.9% year-on-year. In June, the added value of industrial enterprises above designated size increased by 8.3% year-on-year, with an average increase of 6.5% in two years; The chain increased by 0.56%. In terms of three categories, the added value of the mining industry increased by 6.2% in the first half of the year, with an average increase of 2.5% in two years; The manufacturing industry grew by 17.1%, with an average growth rate of 7.5% in two years; Electricity, heat, gas and water production and supply industries grew by 13.4%, with an average growth of 6.0% in two years. The added value of high-tech manufacturing industry increased by 22.6% year-on-year, with an average increase of 13.2% in two years. In terms of products, the output of new energy vehicles, industrial robots and integrated circuits increased by 205.0%, 69.8% and 48.1% respectively year-on-year, and the average growth rate in both years exceeded 30%. In terms of economic types, the added value of state-owned holding enterprises increased by 11.9% year-on-year; Joint-stock enterprises increased by 15.8% year-on-year, and foreign-invested enterprises from Hong Kong, Macao and Taiwan increased by 17.0% year-on-year; Private enterprises increased by 18.3% year on year. In June, the purchasing managers’ index of China manufacturing industry was 50.9%, which was higher than the critical point for 16 consecutive months. The expected index of enterprise’s production and operation activities is 57.9%.

　　From January to May, the total profits of industrial enterprises above designated size nationwide reached 3,424.7 billion yuan, up 83.4% year-on-year, with an average increase of 21.7% in two years. The profit rate of operating income of industrial enterprises above designated size is 7.11%, which is 2.05 percentage points higher than that of January-May 2020.

　　The service industry recovered steadily and the market expectation continued to improve.

　　In the first half of the year, the tertiary industry continued to recover steadily. In the second quarter, the added value of the tertiary industry increased by 8.3% year-on-year, with an average growth of 5.1% in two years; The growth rate in the first quarter was 15.6% year-on-year, with an average growth rate of 4.7% in two years. In terms of industries, the added value of transportation, warehousing and postal services, information transmission, software and information technology services increased by 21.0% and 20.3% respectively in the first half of the year, with an average increase of 6.9% and 17.3% respectively in the two years. In June, the national service industry production index increased by 10.9% year-on-year, with an average growth of 6.5% in two years. From January to May, the operating income of service enterprises above designated size increased by 31.9% year-on-year, with an average increase of 11.1% in two years, 0.2 percentage points higher than that in January-April.

　　In June, the business activity index of service industry was 52.3%, which was higher than the critical point for 16 consecutive months. From the industry situation, the business activity indexes of postal express, telecommunications, radio and television, satellite transmission services, internet software and information technology services, which are closely related to online consumption, are all in the higher boom range of more than 57.0%; Monetary and financial services and insurance are all located in the high-level boom zone above 60.0%. From the market expectation, the expected index of business activities is 60.4%, which continues to remain at a high level.

　　Market sales have gradually improved, and consumption upgraded goods have grown rapidly.

　　In the first half of the year, the total retail sales of social consumer goods was 21,190.4 billion yuan, up 23.0% year-on-year, with an average growth of 4.4% in two years, 0.2 percentage points faster than that in the first quarter; Among them, the growth rate in the second quarter was 13.9% year-on-year, with an average growth rate of 4.6% in two years. In June, the total retail sales of social consumer goods was 3,758.6 billion yuan, up 12.1% year-on-year, with an average growth of 4.9% in two years. The chain increased by 0.70%. In the first half of the year, according to the location of business units, the retail sales of urban consumer goods was 18,409.8 billion yuan, up 23.3% year-on-year, with an average growth of 4.4% in two years; The retail sales of rural consumer goods reached 2,780.7 billion yuan, up 21.4% year-on-year, with an average growth of 4.0% in two years. By consumption type, the retail sales of commodities reached 19,019.2 billion yuan, up 20.6% year-on-year, with an average growth of 4.9% in two years. The catering revenue was 2,171.2 billion yuan, a year-on-year increase of 48.6%, and the scale was basically the same as that in the first half of 2019. By commodity category, the year-on-year growth rate of 18 commodity categories of units above designated size all exceeded 10%, of which more than 70% commodity categories grew at a year-on-year rate of more than 20%. From the two-year average growth rate, except for petroleum commodities, the retail sales of other commodity categories are all positive growth, among which the average growth rate of retail sales of nine categories of commodities such as sports and entertainment products, communication equipment, cosmetics and cultural office supplies exceeds 10% in two years. The national online retail sales reached 6,113.3 billion yuan, up 23.2% year-on-year, with an average growth of 15.0% in two years, 1.5 percentage points faster than that in the first quarter. Among them,The online retail sales of physical goods reached 5,026.3 billion yuan, an increase of 18.7%, with an average increase of 16.5% in two years, 1.1 percentage points faster than that in the first quarter; The online retail sales of physical goods accounted for 23.7% of the total retail sales of consumer goods, an increase of 1.8 percentage points over the first quarter.

　　Investment in fixed assets continued to recover, and the two-year average growth rate of manufacturing investment accelerated.

　　In the first half of the year, China’s fixed assets investment (excluding farmers) was 25.59 trillion yuan, up 12.6% year-on-year, and 0.35% month-on-month in June. The average growth rate in two years was 4.4%, 1.5 percentage points faster than that in the first quarter. In terms of fields, infrastructure investment in the first half of the year increased by 7.8% year-on-year, with an average increase of 2.4% in two years, slightly lower than that in January-May; Manufacturing investment increased by 19.2% year-on-year, with an average growth of 2.0% in two years, 1.4 percentage points faster than that in January-May; Investment in real estate development increased by 15.0% year-on-year, with an average increase of 8.2% in two years, slightly lower than that in January-May. The national commercial housing sales area was 886.35 million square meters, up 27.7% year-on-year, with an average growth of 8.1% in two years. The sales of commercial housing was 9,293.1 billion yuan, up 38.9% year-on-year, with an average growth of 14.7% in two years. In terms of industries, investment in the primary industry increased by 21.3% year-on-year, with an average increase of 13.2% in two years; Investment in the secondary industry increased by 16.3% year-on-year, with an average increase of 2.9% in two years; Investment in the tertiary industry increased by 10.7% year-on-year, with an average increase of 4.8% in two years. Private investment increased by 15.4% year-on-year, with an average growth of 3.8% in two years. Investment in high-tech industries increased by 23.5% year-on-year, with an average increase of 14.6% in two years; Among them, the investment in high-tech manufacturing industry and high-tech service industry increased by 29.7% and 12.0% respectively, with an average increase of 17.1% and 9.5% respectively in two years. In the high-tech manufacturing industry,Investment in computer and office equipment manufacturing, medical equipment and instrumentation manufacturing increased by 47.5% and 34.2% respectively, with an average increase of 26.3% and 18.7% respectively in two years. Among the high-tech service industries, the investment in e-commerce service industry and R&D and design service industry increased by 32.9% and 28.4% respectively, with an average increase of 32.5% and 15.9% respectively in two years. Investment in social fields increased by 16.4% year-on-year, with an average increase of 10.7% in two years; Among them, health investment and education investment increased by 35.5% and 14.2% respectively, with an average increase of 24.9% and 12.5% respectively in two years.

　　The import and export of goods grew rapidly and the trade structure continued to be optimized.

　　In the first half of the year, the total import and export volume of goods was 18,065.1 billion yuan, a year-on-year increase of 27.1%. Among them, exports were 9,849.3 billion yuan, a year-on-year increase of 28.1%; Imports were 8,215.7 billion yuan, a year-on-year increase of 25.9%; Import and export balance, with a trade surplus of 1,633.6 billion yuan. The trade structure continued to be optimized. In the first half of the year, the export of mechanical and electrical products accounted for 59.2% of the total export, an increase of 0.6 percentage points over the same period of last year. The import and export of general trade accounted for 61.9% of the total import and export, an increase of 1.7 percentage points over the same period of last year. The import and export of private enterprises accounted for 47.8% of the total import and export, an increase of 2.8 percentage points over the same period of last year. In June, the total import and export volume was 3,291.6 billion yuan, a year-on-year increase of 22.0%. Among them, exports were 1,812.2 billion yuan, a year-on-year increase of 20.2%; Imports reached 1,479.4 billion yuan, a year-on-year increase of 24.2%.

　　Consumer prices have risen moderately, and the ex-factory prices of industrial producers are still at a high level.

　　In the first half of the year, the national consumer price (CPI) rose by 0.5% year-on-year, and remained flat in the first quarter. Among them, in June, the national consumer price rose by 1.1% year-on-year, which was 0.2 percentage points lower than that in May. It decreased by 0.4% from the previous month. In the first half of the year, the consumer price of urban residents rose by 0.6%, while that of rural residents rose by 0.4%. By category, the prices of food, tobacco and alcohol rose by 0.4% year-on-year, the prices of clothing were flat, the prices of housing, daily necessities and services rose by 0.2%, the prices of transportation and communication rose by 1.9%, the prices of education, culture and entertainment rose by 0.9%, the prices of medical care rose by 0.3%, and the prices of other supplies and services fell by 1.1%. Among the food, tobacco and alcohol prices, pork prices dropped by 19.3%, grain prices rose by 1.2%, fresh fruit prices rose by 2.6%, and fresh vegetables prices rose by 3.2%. After deducting food and energy prices, the core CPI rose by 0.4%, which was flat in the first quarter.

　　In the first half of the year, the ex-factory price of industrial producers nationwide rose by 5.1% year-on-year, an increase of 3.0 percentage points over the first quarter; Among them, June increased by 8.8% year-on-year, and the growth rate dropped by 0.2 percentage points compared with May. In the first half of the year, the purchase price of industrial producers nationwide rose by 7.1% year-on-year, an increase of 4.3 percentage points over the first quarter; Among them, June rose by 13.1% year-on-year and 0.8% quarter-on-quarter.

　　The urban unemployment rate was the same as last month, and the employment situation was generally stable.

　　In the first half of the year, 6.98 million new jobs were created in cities and towns nationwide, achieving 63.5% of the annual target. In June, the national urban survey unemployment rate was 5.0%, which was the same as that in May and decreased by 0.7 percentage points over the same period of last year. The survey unemployment rate of local registered population is 5.0%, and that of foreign registered population is 5.1%. The survey unemployment rates of the population aged 16-24 and 25-59 are 15.4% and 4.2% respectively. The survey unemployment rate in 31 big cities and towns was 5.2%, which was the same as that in May. The average weekly working hours of employees in enterprises nationwide were 47.6 hours, 0.3 hours more than that in May. At the end of the second quarter, the total number of migrant workers in rural areas was 182.33 million.

　　Residents’ income continued to grow, and the ratio of per capita disposable income of urban and rural residents narrowed.

　　In the first half of the year, the per capita disposable income of the national residents was 17,642 yuan, a nominal increase of 12.6% year-on-year, which was mainly affected by the low base in the first half of last year, with an average increase of 7.4% in two years, 0.4 percentage points faster than that in the first quarter; After deducting the price factor, the real growth rate was 12.0% year-on-year, with an average growth rate of 5.2% in two years, which was slightly lower than the economic growth rate and basically synchronized. According to the place of permanent residence, the per capita disposable income of urban residents was 24,125 yuan, with a nominal increase of 11.4% and a real increase of 10.7%. The per capita disposable income of rural residents was 9,248 yuan, a nominal increase of 14.6% and a real increase of 14.1%. From the source of income, the per capita wage income, net operating income, net property income and net transfer income of the national residents increased by 12.1%, 17.5%, 15.0% and 9.0% respectively. The per capita income ratio of urban and rural residents was 2.61, which was 0.07 lower than the same period of last year. The median per capita disposable income of the national residents was 14,897 yuan, an increase of 11.6%.

CCTV Online Review ｜ Not only GDP, but also make good use of GEP as a ＂baton＂

　　"GDP-only theory" has long been criticized, and taking the road of green development has gradually become a consensus. On March 23rd, Shenzhen issued the GEP accounting system, which provided a basis for the pricing of "green water and green mountains", provided a powerful starting point for the policy system of ecological priority and green development, and helped to provide the country with replicable, scalable and landing experience.

　　There is no fixed standard. The new standard is the perfection of the old model, reflecting the improvement of our cognitive level of economic and social development. GEP, the gross product of ecosystem, and the well-known GDP are the evaluation standard systems of economic and social development. In the past, under the extensive development model, the rapid growth of GDP was accompanied by environmental pollution and ecological destruction, which was an unsustainable development model. Especially after the economy has entered the stage of high-quality development, simply using GDP to evaluate the economic development situation can no longer meet the actual needs.

　　In recent years, China has vigorously promoted the construction of ecological civilization, pollution control, environmental protection inspectors, piloted the compensation system for ecological environmental damage, and incorporated ecological environmental protection into the performance appraisal system. The macro top-level design has become increasingly perfect. Now, there are quantitative indicators to promote GEP accounting, which is conducive to the implementation and meticulous consideration of the concept of ecological civilization at the micro level and the practical level.

　　The emergence of GEP has filled the blank of evaluating the total value provided by ecosystem for human welfare and economy and society. Of course, this does not mean that GDP is useless. At present, GDP is still an important indicator to measure and compare the economic development level of different regions. Only with a solid economic foundation can we pursue higher quality development.

　　It can be said that taking GEP accounting as "baton" and "safety bolt" is conducive to promoting the double growth of GDP and GEP, and promoting the effective transformation of GEP into GDP. This is the proper meaning of the concept of "Lucid waters and lush mountains are invaluable assets". At the same time, it has a positive demonstration significance and guiding role in promoting eco-economization and economic ecologicalization according to local conditions. (Text/Wan Quanyong)

Make the road of industrialization of scientific research achievements smoother

China gongLu Bingheng, academician of Cheng Yuan. Photo courtesy of respondents

Lu Bingheng, an academician of China Academy of Engineering, a professor at Xi ‘an Jiaotong University and director of the National Additive Manufacturing Innovation Center, initiated and developed the research on advanced manufacturing technologies such as additive manufacturing (3D printing), micro-nano manufacturing, bio-manufacturing and high-speed cutting machine tools in China, and won the second prize of the National Science and Technology Progress Award and the second prize of the National Technological Invention Award. On April 16th, the reporter had an exclusive interview with Academician Lu Bingheng on the theme of accelerating the cultivation and development of new quality productive forces.

Q: The new quality productivity has been written into this year’s government work report, which has attracted wide attention from all parties. Please talk about your understanding of new quality productivity.

A:In my opinion, the new quality productivity is a productivity development path to get rid of the traditional incremental mode of growth. It has the characteristics of high technology, high efficiency and high quality, and is an advanced productive force that can bring greater benefits.

Among them, there are new demands caused by new technologies, such as commercial aerospace, low-altitude economy and other fields, and there are also new tracks that need iterative upgrading of original technologies and industries and new technologies, such as additive manufacturing.

The commercial aerospace market has broad prospects, which can not only provide services for industrial and agricultural production, but also lead the future development direction. Low-altitude economy is also widely used in air traffic, agricultural production, express logistics, medical rescue, emergency rescue and other fields. Our team focuses on additive manufacturing (3D printing) and has close ties with these two industries.

Whether it is commercial aerospace or low-altitude economy, their market demand presents diversified characteristics. Traditional manufacturing methods need to make molds, tools, etc. first, which is often too expensive and too long, and it is difficult to meet the rapid changes and flexible needs of the market. Additive manufacturing (3D printing) is an ideal technical solution, which is especially suitable for the manufacturing task of multi-variety, small batch and complex products. At present, enterprises in the above industries are actively docking with us and seeking cooperation. By strengthening cooperation and communication, additive manufacturing (3D printing) is expected to become a driver to promote product innovation and respond to the market quickly in these industries, and play an important role in developing new quality productivity.

In addition, we also expect to apply additive manufacturing (3D printing) to the field of large aircraft manufacturing. After verification, the structural parts produced by additive manufacturing (3D printing) can fully meet the requirements of large aircraft manufacturing. In the next step, we will strengthen process exploration and verification, improve production capacity, and help improve the manufacturing level of national large aircraft.

Q: Do you have any suggestions on strengthening scientific and technological innovation, especially original and subversive scientific and technological innovation?

A:Shaanxi has very good basic conditions in promoting scientific and technological innovation. First, there are many universities and research institutes in Shaanxi, and innovative resources rank among the top in the country. Second, Shaanxi is rich in high-end industries, covering aerospace, photonics, unmanned intelligent equipment and other fields.

So, how to turn good basic conditions into real productivity?

First of all, it is necessary to mobilize all forces to carry out scientific and technological innovation, promote the docking between industrial demanders and R&D institutions, and improve the enthusiasm of universities and enterprises to carry out scientific and technological research. In particular, some private enterprises can play an important role in tackling scientific and technological problems, and their role cannot be ignored.

Secondly, we should strengthen basic research. Pay attention to the cultivation of innovative talents and solve problems from the source. We should encourage young people to participate in innovation, stimulate young people to take the initiative to learn and be interested in understanding the laws of things, and then stimulate young people’s creativity and lay a good foundation for the emergence of more "original achievements"; At the same time, create a better atmosphere to encourage innovation and tolerate failure, especially strengthen the support of basic research and support researchers to carry out scientific and technological innovation activities freely.

Q: The source innovation of "from 0 to 1" is very important, as is the transformation of "from 1 to 10" and even more achievements. How to do a good job of "applying scientific and technological innovations to specific industries and industrial chains in time"?

A:After the original achievement comes out, how to turn it into a technology that can be applied in engineering is the problem of "from 1 to 10". In fact, it is generally believed that there is a "gap" between basic research results and industrial application. At present, the country has established a number of national innovation centers, the purpose of which is to fill this "gap" and complete the technological research and development between basic research and industrialization achievements. The National Additive Manufacturing Innovation Center, which we are responsible for, is such an institution.

From the perspective of technology maturity, the research in colleges and universities mainly focuses on level 1 to level 3, while the enterprise application is after level 7. The technical research between Grade 4 and Grade 7 is the task of the Innovation Center.

Of course, universities and enterprises should "fill the gap". On the basis of producing theoretical results, colleges and universities should further move towards engineering application. Enterprises can’t wait until the industrialization results are fully mature to get involved in the transformation, but should participate in the transformation process in advance. Only when all social forces participate in the construction of a research and development system between level 1 and level 10 can the transformation and application of scientific and technological achievements be smooth.

In recent years, Shaanxi has given full play to the role of Qin Chuangyuan’s general platform and the "three reforms", with unique vision and remarkable results. Scientific research itself has many risks, so the financial sector needs to improve its professional judgment and consider it from a long-term perspective to support the transformation of results. Government departments should also play a guiding role and take the lead in attracting social capital to increase investment in the transformation of scientific and technological achievements; It is necessary to effectively strengthen the deep integration and development of industrial chain, innovation chain, capital chain and talent chain, especially to promote the capital chain to play a greater role in serving to cultivate and develop new quality productivity.

Q: What do you think colleges and universities, as the combination of education, science and technology and talents, can do to accelerate the cultivation of new quality productivity?

A:The development of new quality productivity can not be separated from the support of a large number of high-quality talents. The primary task of colleges and universities is to cultivate talents, and in the process of training, it is very important to actively organize teachers and students to carry out scientific research. Especially in the field of engineering, students should be guided to find, ask and solve problems from engineering practice, so that students can grow better and really learn practical knowledge.

Practice has proved that the engineering application is flexible and changeable. There are often many solutions to an engineering problem. Therefore, we encourage students to dare to think and innovate, and constantly explore and choose better solutions.

At the same time, scientific research is also an important task of colleges and universities. On the one hand, there are many technical problems in social practice that need to be solved by colleges and universities; On the other hand, leading students to participate in scientific research is also an effective way to cultivate high-quality talents. Talents often grow up in the process of solving new problems.

Q: How can Shaanxi do a good job in the deep integration of technological innovation and industrial innovation, and make greater strides in cultivating new quality productivity and promoting high-quality development?

A:Shaanxi is rich in innovative resources and diverse in innovative subjects. To promote the high-quality development of key industrial chains such as high-end equipment manufacturing and aerospace, we should give full play to the characteristics and advantages of these industries.

In the aviation field, Shaanxi has a complete innovation chain from design, manufacturing, assembly to flight test; In the aerospace field, Xi ‘an has the research and development capabilities of solid rockets and liquid rockets, and its rocket power research and development capabilities have advantages in the country. These industrial development areas should pay attention to better integration with new technologies, and at the same time strengthen the integration with personnel training to achieve high-quality development.

In addition, in terms of emerging industries and future industries such as low-altitude economy, commercial aerospace, Shaanxi has strong technical reserves and talent reserves, and its development advantages are obvious. We should pay more attention to the combination with additive manufacturing (3D printing) and other technologies, and integrate the forces of scientific research institutions, universities and enterprises to promote the design, development and production of new products. By constructing innovation chain, industrial chain and talent chain that are suitable for the development of emerging fields, we will actively contribute to the strategic capacity building of emerging fields.

A citizen of Beijing was almost sold by telecom fraud, but was discouraged by the police.

　　CCTV News:Recently, the police of the anti-fraud center of Dongcheng Branch of Beijing Public Security Bureau successfully prevented a telecom fraud case of investment and wealth management, and avoided losses for the victims who almost sold the house. From the anti-fraud police who handled the case, we learned that the means of fraudsters are constantly being refurbished, but the police have also prepared "eighteen weapons" in a targeted manner and made every effort to ensure the property safety of citizens. "Some scammers may talk to the victims for months about fraud, but we have to help the victims as soon as we have the clues ‘ Anti-brainwashing ’ This requires us to master the corresponding words and adapt to the characteristics of different victims. " The police reminded that the proportion of highly educated and young people among the victims is gradually increasing. "In addition to being careful about fraud when answering the phone every day, you should also pay more attention to strangers you meet on the Internet to avoid property losses."

　　The police on vacation found the victim’s family for the first time.

　　Successfully avoid huge losses

　　"On that day, Yan Yan was originally resting. After learning the situation, she contacted us and the police at the police station for the first time and went to the door to find the victim’s family to help the victim avoid the loss." Recently, the police of the anti-fraud center of Dongcheng Branch of Beijing Public Security Bureau introduced that a victim fell into the fraud trap of "investment and wealth management" and was ready to sell the property under his name and put the money into the account designated by the liar. The police of Dongcheng Anti-fraud Center, including Yan Yi, stopped in time.

　　Yan Yi said that this is just one of the successful cases in which Dongcheng police intercepted telecom fraud recently. With the efforts of Dongcheng police, many telecom fraud cases have been successfully discouraged by the police recently.

　　In the office of the anti-fraud center of Dongcheng Branch, after receiving the clue that a citizen received a fraudulent phone call, the police contacted the citizen concerned for the first time to confirm that the other party was not deceived. Yan Wei introduced that once the citizens are found to be fooled, the police will try to contact the citizens in the first place through various means to avoid property losses.

　　"A few days ago, a hotel receptionist suffered telecom fraud. Because she was brainwashed by a liar, the 20-year-old woman cut off all communication with the outside world, leaving only the channel to contact the liar. We couldn’t contact her and quickly tried to find her family. " The police in the anti-fraud center recalled that when the police contacted the father of the victim who was far away in Inner Mongolia by telephone, his father did not give full trust to the police, and he could not be connected by calling again.

　　The police searched all the way according to her life clues and found the hotel where she worked. "After answering the phone, the people in the hotel also said that they felt that the waiter was not in the right state today, but after searching, they confirmed that she was no longer in the hotel."

　　At this time, the woman victim has been guided by the liar to hide, and the police have searched for her whereabouts through various channels. Through the efforts of the police, she finally found out the problem and lifted the communication barrier, and then saw countless missed phone calls and prompt messages from the police.

　　"After that, the woman victim expressed her gratitude to our police several times and thanked us for helping her avoid property losses." Yan Yi said that in some cases, some young people will feel that they don’t have much savings and are not afraid of being deceived. But now some scammers will brainwash young people and induce young people to borrow online. Once they are set up, the victims will bear a heavy burden. "So we are very happy to see that this female victim has not been deceived."

　　Fraud victims are becoming younger.

　　A young mother was brainwashed and took her child "wandering" for 27 hours.

　　The police of the anti-fraud center reminded that with the vigorous promotion of anti-fraud propaganda in the community in recent years, the anti-fraud awareness of many elderly people has been significantly improved, but the proportion of young people with high academic qualifications among the victims has increased. "Some time ago, a young mother with a high degree of education suffered from telecom fraud. When her husband received our notice and rushed home, he found that his wife and children were both ‘ Missing ’ Yes. "

　　The police recalled that many policemen searched for the whereabouts of the mother and child through various methods that day. When they finally found the two, the time had passed 27 hours.

　　"We later learned that after the child’s mother was brainwashed by the liar, she kept wandering outside with her children. At night, she found a shared study room to sleep, and the children slept directly on the table in the study room." The police recalled that fortunately, the victim did not transfer the money and avoided a huge property loss.

　　The police reminded that some of today’s scammers are very skilled. For some young people with insufficient social experience, "lethality" is huge, and they must not be taken lightly because they study well. "In addition to preventing fraudulent phone calls, young people should be extra careful about fraudsters on online platforms, such as lovers and investment consultants they know online. They must pay more attention. If the other party proposes investment or transfer money, they should be more careful to avoid being deceived."

　　The swindler penetrated the victim’s mind and proposed to engage in activities together.

　　Police remind citizens to raise anti-fraud awareness.

　　Although the means of fraudsters are constantly being refurbished, the police have also prepared "eighteen weapons" in a targeted manner and made every effort to ensure the safety of citizens’ property.

　　Yan Yi recalled that in the above-mentioned "investment and wealth management" fraud in which the victim almost suffered a loss of tens of millions of yuan, the liar made sufficient preparations. "The victim later told us that the liar and she met online, and they chatted for a while. Knowing that the victim was keen on some activities, the liar also offered to engage in activities with the victim."

　　Later, the swindler sent the victim a QR code, instructing the victim to download an investment software after scanning. After mastering these situations, the police immediately drove to the victim’s home to persuade.

　　Yan Yi said that before persuasion, she would learn something about the victim through various channels. "Knowing everyone’s characteristics, we can persuade more pertinently and realize ‘ Anti-brainwashing ’ On the other hand, some victims’ families are older and may have physical problems. They should pay more attention when dissuading them to avoid making their families too nervous and having accidents. "

　　"After successfully dissuading the victim, we also popularized anti-fraud knowledge to prevent her from being deceived again." Yan Yi recalled that the victim was very grateful to the police for their efforts after realizing that she had been deceived. "We also hope that everyone can raise their awareness of anti-fraud and all parties will work together to protect the citizens’ ‘ Money bag ’ , let ‘ There is no fraud in the world ’ The day will come soon. "

Create a new benchmark for manufacturing in China and explore Geely Xi ‘an super intelligent black lamp factory.

　　As a benchmark model in the era of 4.0 car-building, it has been recognized by the market in terms of product strength. It has sold 26,263 vehicles in more than two months, and the current order exceeds 60,000 vehicles. The R&D and manufacturing strength behind it must have been completely changed. The answer is Geely Super Intelligent Black Lamp Factory in Xi ‘an.

　　Brief introduction of Xi’ an manufacturing base

　　Xi’ an manufacturing base is Geely Automobile’s vehicle production base with the largest area, the largest investment, the highest products, the most advanced technology and the highest degree of intelligence. It covers an area of 2,260 mu, with a total investment of over 10 billion. It has four workshops: stamping, welding, painting and final assembly, with a maximum annual production capacity of 360,000 units, integrating digitalization, automation, intelligence and flexibility.

　　At present, only "China Star" series flagship model Xingyue L is produced. The factory planning supports the production and manufacture of CMA and SEA models with vast architecture, and meets the flexible, automatic and intelligent collinear production of 6 models on 3 platforms. The automatic turntable and switching library are used to switch models, which can be completed within 1 minute. It covers electric vehicles, hybrid vehicles and fuel vehicles.

　　Xingyue L ushered in the 30,000 th off-line ceremony.

　　On October 13th, Xingyue L ushered in the 30,000th off-line ceremony at the manufacturing base in Xi ‘an, Jili. In the past September, the sales volume of Xingyue L reached a new high, reaching 10,168 vehicles. After more than two months of listing, the cumulative sales volume was 26,263 vehicles, and the current orders exceeded 60,000 vehicles. In order to meet the needs of consumers, a new two-wheel drive intelligent model was added, with a guiding price of 163,200 yuan, shortening the delivery cycle from 90 days to 45 days.

　　As the flagship series of Geely brand, "China Star" achieved a sales volume of 21,520 vehicles in September, accounting for 25% of the sales volume in the product matrix of Geely brand. Among them, "China Star Flagship Family Car" Xingrui sold a total of 10,173 cars in September, and 95,726 cars in the first nine months of this year. The total sales volume has exceeded 110,000 cars in the 11 months since its listing.

　　What is a black light factory?

　　Xi ‘an manufacturing base has a full-process manufacturing plant, including stamping, welding, painting and final assembly. At present, there are less than 2,000 employees in Xi ‘an manufacturing base, which is about half of the average factory. High intelligence and automation are the basis for the realization of the black lamp factory.

　　Among them, stamping: materials from unstacking, feeding, cleaning, two-piece separation, compressor transmission, until the stamping parts are off-line, are all realized by automation: welding: the automation rate is 100%, and the "Apras welding process" unique to luxury cars and the industry-leading laser fusion welding process are also applied.

　　Painting: pretreatment electrophoresis, sealing and topcoat are three stages, and 120 sets of robot systems are connected in series to realize full-automatic production, adopting the world’s most advanced and environmentally-friendly B1B2 water-based intermediate coating-free process; Final assembly: the chassis is assembled automatically to realize the automatic assembly of the car body and chassis at one time, and the front and rear windshield and tires are assembled automatically without people.

　　The stamping workshop is fully automatic, and the die can be changed automatically in 3 minutes.

　　The stamping workshop has a total construction area of about 27,000 square meters. The production line adopts the products of international first-class enterprises, uses advanced technologies such as dust prevention and noise reduction, automatic handling, one-button die change and so on, and adopts AGV transportation system for finished product transportation. It is a leading stamping production line in China.

　　The stamping workshop is equipped with 12 presses, and it is planned to have three high-speed stamping lines: Line A and Line B are put into production, and Line C is a reserved production line. The stamping process is fully automatic, and the whole line is closed to prevent dust and reduce noise, and the noise is less than 85dB. Production of steel-aluminum mixed line: the first line is equipped with German SMT wet cleaning machine and Wandres dry cleaning machine, and the stacking is also equipped with air knife, and the waste line is reserved for aluminum plate transmission. The production of aluminum plates can be switched at any time to meet the production requirements of lightweight car bodies. The whole line can realize automatic die changing in three minutes.

　　Intelligent unmanned transportation system: AGV is equipped at the end of the line, which can be put into storage with one button. Through the dispatching management system, the stamping parts can be transferred automatically by cruising, and it has the functions of automatic charging, dormancy and awakening. Three-dimensional warehouse: the workshop is equipped with intelligent three-dimensional warehouse, and WMS storage system is adopted. One-click operation can complete the loading and unloading of end pickers, and the three-dimensional storage space can improve the storage utilization rate by 400%.

　　Welding workshop introduces high-end car welding technology.

　　The welding workshop covers an area of 91,000 square meters. There are 585 robots in the whole workshop, and the welding automation rate can reach 100%, including 11 advanced manufacturing processes, such as spot welding, projection welding, stud welding, Arplas welding, laser welding, laser cutting, MAG/MIG welding, riveting, online punching, edge rolling and press edging. It has the flexible collinear production capacity of 5+1 vehicles and the production cycle can reach 60JPH.

　　ISV cluster flexible vehicle line measuring system: The main line measuring station adopts ISV cluster flexible vehicle line measuring system, which can complete 100% measurement of 235 key measuring points of the vehicle body and store data for accurate monitoring of the dimensional stability of the vehicle body.

　　The painting workshop adopts B1B2 water-based intermediate coating-free process for waste gas recovery and treatment.

　　Covering a total area of 33,000 square meters, it mainly undertakes tasks such as body anticorrosion/sealing, NVH (sound insulation and noise reduction) and spray decoration. More than 2,000 process parameters, more than 150 energy consumption parameters and more than 1,000 equipment parameters in the whole workshop can be monitored automatically and in real time. Fully enclosed operation can effectively reduce employees’ occupational injuries and environmental pollution.

　　Body topcoat adopts the world’s most advanced B1B2 water-based intermediate coating-free process, and compared with the traditional process, the emission of VOCs (volatile organic compounds) is reduced by 30%. 36 robots realize automatic gluing; Waste gas treatment device: the coating waste gas is incinerated by concentrating wheel+RTO incineration system and TNV incineration system, so as to ensure that the VOCs emission is less than 30 mg/m and the heat energy recovery rate is over 95%.

　　Real-time monitoring data record of chassis automatic assembly in assembly workshop

　　The general assembly plant has a total construction area of 108,000 square meters, and the production line adopts a modular, intelligent, flexible and automatic assembly system, which improves automation, and at the same time, it also has humanized equipment for employees to operate, reducing production intensity and improving safety.

　　The whole chassis is automatically assembled to realize the full-automatic one-time assembly of the vehicle body and chassis, and the high-precision servo tightening shaft realizes the synchronous tightening of chassis mounting points, which can meet the requirement that 30 bolts can be tightened synchronously within 16s, and the tightening positioning accuracy is ±0.25mm；; The windshield gluing installation and tire installation all adopt unmanned automatic installation.

　　Intelligent, interconnected and efficient torque management system is introduced. All assembly torques have closed-loop control, realizing the functions of real-time control and data recording in the assembly process. EPS tightening error prevention system provides complete process error prevention.

　　Self-sufficient ecological factory

　　Whether it is carbon neutrality and peak carbon dioxide emissions’s long-term goal or energy and environmental protection indicators, Xi ‘an factory is a green ecological factory with zero pollution in its life cycle.

　　It realizes the "three zero" green circulation system in the manufacturing cycle: 0 waste water discharge, 0 waste landfill and 0 harmful substance discharge; It will have a 400,000 ㎡ super photovoltaic power generation system with a total investment of 264 million yuan, which will be completed in 2022. The annual power generation is 66 million kwh, saving 25,072 tons of standard coal and reducing 62,482 tons of carbon dioxide. The energy emission reduction effect is equivalent to planting 3,726 hectares of forest.

　　Comments:The high-standard R&D and manufacturing system brings high-standard car products. Xingyue L is one of the high-end models of Geely brand built under this background. Geely Xi’ an manufacturing base has realized the whole process automation of stamping, welding, painting and final assembly. Digitalization and intelligence have greatly improved the manufacturing standards, and ensured the standardization of each car manufacturing, the traceability of manufacturing processes, etc., reducing the quality defects caused by human intervention. This is what factory manufacturing should look like in the industrial 4.0 era, and it also adds a quality guarantee to Xingyue L.

China brand show muscle Munich auto show heavy new car

　　[Aika Auto Munich Auto Show Original]

　　Shortly after the Chengdu Auto Show ended, on the other side of the globe, the Munich Auto Show was grandly opened this week. The predecessor of Munich Motor Show was Frankfurt Motor Show. In 2020, the German Automobile Industry Association announced that the Frankfurt Motor Show, which had been held for 70 years in a row, had come to an end because of the criticized problems such as environmental protection and automobile industry reform, and Munich, the third largest city in Germany, stood out from the candidate cities. The original Frankfurt Motor Show will be held in Munich and officially renamed as Munich Motor Show. Different from the previous Munich Auto Show, this Munich Auto Show innovatively integrated many exhibition halls into the city, allowing ordinary consumers to get close contact with these new products. Another highlight of this year’s Munich Auto Show is that China brand groups show off their muscles. BYD, Zero Run, Aouita and other domestic car companies have participated in the exhibition. The aggressive China brand even asked German Chancellor Scholz to cheer for German brands: "German companies should be encouraged, not scared", and announced that they would throw hundreds of billions of euros to support the development of German electric vehicle industry. Let’s take a look at what new cars are worthy of attention at this Munich Auto Show.

Munich motor show

　　BYD: Seal, Song PLUSEV Champion Edition, Yuan PLUS, Dolphin, Han, Tengshi D9

　　At this auto show, BYD brought six models, namely Seal, Song PLUSEV Champion Edition, Yuan PLUS, Dolphin, Han and Tengshi D9. It has demonstrated its strong strength to the whole world. Seals, in particular, have officially started the pre-sale and announced the price, providing two versions, with the price of 50,990 euros (about 400,000 yuan) and 44,900 euros (about 350,000 yuan) respectively. Song PLUSEV Champion Edition also met with European consumers for the first time, and it is expected that it will be officially listed in the European market in the near future.

Munich motor show

　　It can be seen. The price of seals listed in Europe is much higher than that in China, which also reflects BYD’s confidence in its own products. Seals take "marine aesthetics" as the core design concept, showing the sense of movement and strength brought by low body and low wind resistance coefficient. In the interior, it is equipped with a three-spoke steering wheel, an electronic shift lever, a 10.25-inch full LCD instrument panel and a 15.6-inch adaptive rotating central control panel, which is full of science and technology. In addition, diamond quilting and double stitching technology, through tuyere, exquisite crystal bar and central control layout of "in the heart of the sea" all show its concept of marine aesthetics. In terms of power, Seals offer two options: rear drive and four-wheel drive, both of which are equipped with 82.5kWh battery packs. The cruising range of the rear-drive model is 570km, and the cruising range of the four-wheel drive model is 520km.

Munich motor show

　　The champion version of song PLUSEV in the European market is called seal u. The Champion Edition of Song PLUSEV, which landed in the European market after its name change, did not make much changes. It adopted marine aesthetics to design the front face, showing a youthful and sporty feeling as a whole. The interior is equipped with 15.6-inch adaptive rotating suspension PAD and DiLink intelligent network connection system. In terms of power, Seal U currently has only two types of two-wheel drive vehicles. The maximum power of the motor is 218 HP and 204 HP respectively, and the cruising range is 420km and 500km respectively under WLTP conditions. According to French media reports, the starting price of this seal U is expected to be less than 50,000 euros.

Munich motor show

　　Aouita: Aouita 12 is the world premiere.

　　Aouita made the world premiere of Aouita 12 at the Munich Motor Show. The new car is positioned as a medium-sized pure electric intelligent luxury coupe, which will be available in two-wheel drive and four-wheel drive versions, and will be delivered in the China market in the fourth quarter, and will enter overseas markets next year. Aouita 12 is operated by Aouita Global Design Center in Munich, Germany, adhering to the overall design concept of "Future Aesthetics". The whole vehicle has a bright and three-dimensional curved surface and a high streamline contour, which makes it have super high design recognition. It is worth mentioning that, in addition to the iconic E-shaped LED curvature headlight group, the front face also has an exclusive HALO screen, which consists of 10,500 light beads and can be used for human-vehicle interaction. A large number of sensors such as semi-solid laser radar, millimeter wave radar, ultrasonic radar and camera will also be assembled in the front of the car.

Munich motor show

　　The cockpit of Aouita 12 adopts the concept of Gentle Tech minimalist design, which minimizes the number of physical buttons and only keeps the necessary buttons with high practicality. A futuristic integrated instrument panel, while the front instrument panel extends to the feathered design of the doors on both sides. The upper part of the car door adopts 3D ribs with parametric design, and continues to the partition at the back of the cockpit, which strengthens the unified style inside the cockpit and gives the drivers and passengers a warm feeling of being surrounded. Each door is provided with a cover-type hidden storage space, and the center console integrates an adaptive lifting wireless charging island and a cup holder. No back porthole hatchback design, with high-quality NAPPA leather material and real wood center console, minimalism and luxury complement each other.

Munich motor show

　　The Aouita 12 four-wheel drive model will be equipped with Huawei DriveONE dual-motor system, and the maximum power of the front and rear motors is 195 kW/230 kW respectively; The maximum power of single motor model is 230kW. The battery comes from Contemporary Amperex Technology Co., Limited ternary lithium battery pack. According to the official, Aouita 12 is expected to be equipped with intelligent air suspension.

Munich motor show

　　Zero Run: Zero Run C10 world premiere

　　The first global model of zero-run car — — Zero run C10 was officially unveiled at Munich Auto Show. The new car is based on the new central integrated electronic and electrical architecture "four-leaf clover", positioning a medium-sized SUV, and will be equipped with two power systems: extended range and pure electric, and will launch five-seat and six-seat models. At the press conference, Zero Car also announced that it will launch five global new products in the next two years to meet the needs of the left and right rudder markets, and the new cars will be sold in Europe, Asia Pacific, the Middle East and America.

Munich motor show

　　Zero Run C10 adopts the latest family design language, and adopts a closed grille design. The upper part of the grille is a penetrating LED strip, which, combined with the lower enclosure of the penetrating design, further stretches the visual width of the front face. The side lines of the new car look very smooth, and it is equipped with the popular hidden door handle, and the laser radar is also equipped above the roof.

Munich motor show

　　Saic mg: mg cyberster, MG4 Electric XPOWER performance edition, Marvel R

　　At this auto show, SAIC MG brought three models, namely MG Cyberster, MG4 and Marvel R. As the world’s first pure electric soft-top roadster, MG Cyberster also has super performance matching its appearance: its zero-hundred-speed acceleration only takes 3.2 seconds, and it has been adjusted by the master chassis of the F1 champion team of DANISI Engineering. In the cockpit of MG Cyberster, three screens are designed for the driver, which constitutes a three-dimensional driving experience. At the same time, the steering wheel adopts the gamepad design and the gear shifting mechanism adopts the button type. The new design brings more new experiences.

Munich motor show

　　In the first seven months of this year, the cumulative sales volume of MG4 in Europe has exceeded 40,000, making it the champion of pure electric compact car sales in Europe. The performance version of MG4 Electric XPOWER is the performance version of MG4. It is built on the platform of "SAIC Nebula" pure electric exclusive series, and adopts the power of front and rear dual-motor four-wheel drive, which can output powerful power of up to 435 horsepower, and the zero-speed acceleration is only 3.8 seconds. In addition, its chassis and suspension have been upgraded and optimized, including suspension system with 25% rigidity improvement, more sensitive steering system and large-size brake disc with a diameter of 345 mm.

Munich motor show

　　Marvel R is the second new car of SAIC R with MG logo in the European market. Marvel R is a model based on European standards and the world’s first 5G intelligent electric SUV. What was brought at the auto show was the 2023 new car. Marvel R is equipped with a three-motor intelligent four-wheel drive, with an acceleration of 4.8 seconds. At the same time, it is also equipped with an iSMART intelligent network connection system. In addition to the performance experience of new energy vehicles, it also brings new senses of intelligent internet technology.

Munich motor show

　　Tucki: International P7i and G9

　　At the Munich Motor Show in 2023, Xpeng Motors made the first international auto show with the international versions of P7i and G9, and announced the strategic plan of entering the German market and more globalization in 2024. According to the official information released by Tucki, Xpeng Motors plans to introduce the international versions of P7i and G9 to the German market in 2024. In addition, Xpeng Motors will continue to expand its sales and service network in Europe. By the end of 2023, Xpeng Motors is expected to have 17 European stores and 15 service centers.

Munich motor show

2.0T+ wet dual clutch (DCT) is only 398,800, which is not a waste.

If you have requirements for the power of the vehicle, besides the engine parameters, you should actually care about some other data. It’s a medium-sized suv. I wonder how much you know about it. As for its advantages, please read on.

Let’s take a look at the appearance of the Audi Q5L first. The front design of the Audi Q5L is very soft, with a hexagonal grille, which looks very young and individual. Combined with simple and fashionable headlights, the grade of the whole vehicle is improved. The car is equipped with LED daytime running lights, automatic opening and closing, automatic steering, delayed closing, rain and fog mode, etc. Coming to the side of the car body, the size of the car body is 4770 mm * 1893 mm * 1667 mm. The car adopts comfortable lines, and the car body looks very soft. With large-sized thick-walled tires, it looks full of sports. In the rear design, the Audi Q5L rear line is dynamic, the taillights give people a very fashionable and dynamic feeling, and the lower exhaust pipe adopts the design of bilateral double outlet, which is still relatively fashionable and sporty in general.

When I came to the Audi Q5L car, the interior design of Audi Q5L took a round and lovely route, and the overall design atmosphere was still in place. The steering wheel of the car adopts a three-spoke design and is made of leather, which looks a little more fashionable and simple. Let’s take a look at the central control, which is decorated with a 10.1-inch central control screen, making the interior style impressive and hard-core. The dashboard and seats are equally eye-catching, and the dashboard design is remarkable, which looks strong in science and technology. The car uses leather seats, which are wide and thick and very comfortable to ride.

Audi Q5L is matched with a wet dual clutch (DCT) gearbox, with a maximum power of 180KW and a maximum torque of 370N.m, with good power performance.

Audi Q5L space performance is good, and the leg head space is quite comfortable, which brings a better ride experience. In addition, the car is equipped with anti-lock braking system (ABS), LED daytime running lights, brake assist (EBA/BAS, etc.), braking force distribution (EBD), traction control (ASR/TCS, etc.), main driver airbag, passenger airbag, side airbag curtain, front airbag and rear airbag.

This car has been introduced almost before, and I believe many users who buy a car have taken a fancy to its comfort and practicality. If you are excited, you may wish to go offline and actually feel it.

Landmap bosom friend spy photos at home and abroad exposed, or released in the third quarter

Recently, the results of the college entrance examination have been announced one after another, and the videos of straight-A students have taken turns to swipe the screens of major platforms, and their hard work has finally been rewarded at this moment. In the rim, there is also such a "985" straight-A student, which is the first global car from the "national team" Lantu – Lantu bosom friend. Relevant information shows that the new car may be released in the third quarter of this year.

The reason why Lantu’s confidant is "985" straight-A student comes from the support of three core indicators: 901km ultra-long pure electric battery life, the global 800V silicon carbide platform, and the blessing of 5C battery supercharging technology.

In recent days, many overseas netizens shared the pictures of Landmap’s bosom friend in the local road test. In Dalian, where the Summer Davos Forum was being held, some netizens saw the figure of Landmap’s bosom friend camouflage car. The attention at home and abroad was super high, which once again triggered a heated discussion on the whole network.

Landmap bosom friend road test spy photo. Landmap car photo, sent by Hualong.com

Although the spy photo has been deeply camouflaged, the visual contour of the Lantu bosom friend is impressive. Different from the Lantu FREE 318 mecha wind hardcore shape, the overall line of the Lantu bosom friend is rounded. Thanks to the native high-end intelligent electric architecture ESSA empower developed by Lantu, the width of the Lantu bosom car is nearly 2 meters, creating a thick wide-body coupe style. With the body layout of four wheels and four corners and the length of 4725mm, it brings users a 2900mm ultra-long wheelbase comparable to that of a medium and large SUV.

At this year’s Landmap Spring Technical Communication Conference, Landmap CEO Lu Fang’s description of Landmap’s bosom friend’s performance in Sandian, Smart Cabin, and Smart Driving also made everyone look forward to the arrival of this new car. In terms of intelligent experience, Landmap bosom friend builds smart cockpit through cutting-edge technology, and smart driving is also very interesting, both of which are highly concerned by the consumer market.

Lantu’s confidant is developed for the global market, and with the comprehensive strength of leading the industry in an all-round way, it may become the fulcrum of Lantu’s sales. It is frequently compared with the Model Y with similar positioning by consumers, which shows that everyone is quite interested in the competition between the two top new energy products in China and the United States. As the pace of new car advancement continues to accelerate, the whole picture of Lantu’s confidant is becoming clearer. Let’s wait and see how the future market performance will be.

Meizu 21 won the 2023 Master Lu Jiaojian ＂The Most AI Performance Mobile Phone of the Year＂ and ＂The Best Screen Mobile Phone of the Year＂ double awards, exquisite experience and sought after by peopl

On the evening of January 18, 2024, Master Lu’s "2023 Horn Tip Year-end Awards Ceremony" officially opened, and the ownership of the 23 "Horn Tip" trophies was also revealed one by one.

In this year’s re-start, and the rapid pace of Meizu, with two flagship products back to the industry popular and consumer vision. At the 2023 Lu Master Niujiaojian Awards Ceremony, many friends are also concerned about their results.

It is gratifying that with the latest flagship Meizu 21 of the year, Meizu has won the double awards of "The Most AI Performance Mobile Phone of the Year" and "The Best Screen Mobile Phone of the Year" in the mobile phone category, becoming one of the few brands and products that can "double kill" the horn tip award in the same category this year.

In the competition of "the most powerful AI phone of the year", Meizu 21 benefited from the improvement of AI performance of Snapdragon 8 Gen3, and combined with Meizu OneMind smart engine, it brought users an excellent AI experience. Not only that, with the support of Flyme AI model, Meizu 21 can become an "encyclopedia that answers questions immediately". Aicy with a large amount of knowledge can answer various questions such as natural science, life knowledge, health knowledge, emotional questions and answers, and can also make writing easy and efficient, and generate paintings based on creative inspiration, bringing a richer AI experience.

2023 is a year of explosive growth of generative AI and large models, and smartphones are no exception. From upstream chip design to localized operation of manufacturer systems, AI is the core. As the most integrated smart end point at present, mobile phones will undoubtedly become the final landing point of generative AI universalization. The award of Meizu 21 not only means that the Meizu brand has kept up with the mainstream of the industry and cut into the hot track, but also means the feasibility and bright prospects of generative AI and large model landing mobile phone end points.

In the competition of "Best Screen Phone of the Year", Meizu 21 stood out with a 6.55-inch Samsung E6 flagship straight screen. It adopts Samsung diamond arrangement, supports 120Hz high refresh rate, DCI-P3 wide color gamut, has 1800nit peak brightness, and supports 1920Hz PWM high-frequency dimming, as well as SGS low blue light eye protection, supports mLight 10,000-level dimming, whether it is display effect or eye protection, this screen is very good. In the latest "Screen Optical Test Report" results of Master Lu Laboratory, Meizu 21 won the title of Best Screen Phone of 2023 with a comprehensive score of 93.65 points.

Meizu, which has always conquered the industry and consumers with exquisite design, not only brings a stunning front screen to Meizu 21, but also has many remarkable aspects of its process design. For example, the black edge of the front screen of Meizu 21 is extremely narrow, and the R corners on all four sides are evenly arranged, avoiding the problem of narrow top and narrow bottom width. It has reached a new level in aesthetics, which can be called a truly perfect extremely narrow four-border.

It is worth mentioning that the Meizu 21 also features a classic frontal white panel that is currently rare on the market. With a four-sided design, it can be called artistic.

In the past year, the screen display of smartphones has made great progress in technology, with screen substrates, refresh rates, resolutions, eye protection and dimming all being enhanced. Meizu 21 is not only the best integrated display of these technologies, but also announced to the outside world that Meizu is still the original Meizu who pursues refinement, has never changed, and will continue to move forward.

Finally, let’s congratulate Meizu and Meizu 21 again for winning the double awards of 2023 Master Lu Niujiaojian "The Most AI Performance Mobile Phone of the Year" and "The Best Screen Mobile Phone of the Year"!